Difference between revisions of "Keyboard macros"

From WikEmacs
Jump to navigation Jump to search
(Bike Storage Ideas)
(Undo revision 46814 by 62.210.38.184 (talk))
(439 intermediate revisions by 90 users not shown)
Line 1: Line 1:
 +
{{Manual|emacs|Basic-Keyboard-Macro|Basic Keyboard Macro}}
  
−
Bike Storage Ideas
+
'''Keyboard macros''' can be used to automate or repeat tedious editing tasks in Emacs.
  
−
This is one of several oldest and cheapest bicycle storage solutions. Simply get a large steel hook (some are sold for bicycle storage and they are coated in rubber) and screw it right into a ceiling beam. More professional, specialized versions of this product are offered which has a contact plate and keep the hanging wheel from marking inside the wall. Pros with this storage option incorporate a very narrow storage profile, cheap and easy installation. Cons range from the awkwardness of lifting and hanging your bike and having to put an in-depth hole inside the ceiling of your property or apartment.
 
  
−
Storage racks hold between one and four bicycles with a wallmounted rack. These adjust to fit the height in the storage area and bigger racks stagger the stored bicycles being a spacesaving measure. These require some installation, usually mounting one wall stud while using a screwdriver. Specialty models regularly include shelves and additional hooks and space for equipment like helmets, bags and bicycle pumps. Pros of the option offer an excellent by using space, good choice, and sturdy construction. Cons include permanent installation as well as average cost.
+
==Basic Use==
  
−
These storage racks offer a modified version of a mounted storage rack, holding a couple of bikes against a wall, but use gravity and design to stay in place. This will make their cost lower and enables you to avoid drilling holes in a very wall. Construction is toolfree and. Pros include lower price and easy installation. To be a con, these racks, while easy to lift and use, will not be as sturdy since the permanently installed models, so they really mustn't be used in combination with crowded spaces.
+
; {{Keys|F3}}, or {{Keys|C-x (}}
 +
: Start defining a macro.
 +
; {{Keys|F4}}, or {{Keys|C-x )}}
 +
: Stop defining a macro.
 +
; {{Keys|F4}}, or {{Keys|C-x e}}
 +
: Execute a macro
 +
; {{Keys|C-u 37 C-x e}} or {{Keys|C-u 37 F4}}
 +
: Execute a macro multiple times, using [[prefix argument]]
 +
; {{Keys|C-u 0 C-x e}}
 +
: Execute a macro until the end of the buffer
  
−
A whole new storage solution, ceiling hoists are inexpensive, convenient and very straightforward to install. Some small pulleys is mounted in the ceiling, as well as the bike is just raised taken care of and soon you next require it. As being a storage option, it is far easier over a ceiling hook and less expensive than storage racks. Notably if you have a very quiet corner or high ceilings, this option supplies a good solution at a inexpensive cost. Pros range from the affordable, low shipping weight and flexibility, simply because this system enables you to hold other outdoor equipment, as being a kayak. Cons add a more slightly involved installation process as well as the chance that your particular bike, while raised, can always impede.
+
==Example usage==
 +
 
 +
Consider the standard <code>*scratch*</code> buffer:
 +
 
 +
<pre>
 +
;; This buffer is for notes you don't want to save, and for Lisp evaluation.
 +
;; If you want to create a file, visit that file with C-x C-f,
 +
;; then enter the text in that file's own buffer.
 +
</pre>
 +
 
 +
Suppose you want to remove the first occurrence of the letter "a" on every row in that piece of text. You could write a [[regular expression]] to do the job, but let's assume you want to use a keyboard macro this time.
 +
 
 +
# Make sure [[point]] is at the start of the buffer.
 +
# Hit <code>C-x (</code> to start recording your macro. '''Note:''' If you hit <code>C-g</code> or if an error occurs, your keyboard macro recording will stop.
 +
# Hit <code>C-s</code> followed by <code>a</code> to find the first "a". Now, point is right after the first "a" in the text.
 +
# Hit backspace to delete that "a".
 +
 
 +
The first occurrence of "a" of the first line has been deleted. Let's move point to the beginning of the next line and then stop recording.
 +
 
 +
<ol start="5">
 +
<li>Hit <code>C-e C-f</code> to move point to the beginning of the next line.</li>
 +
<li>Hit <code>C-x )</code> to finish the recording of our macro.</li>
 +
</ol>
 +
 
 +
The macro you have just recorded performs the operation of removing the first occurrence of "a" it can find and then moving point to the next line.
 +
 
 +
<ol start="7">
 +
<li>Hit <code>C-x e</code> once to call that macro.</li>
 +
<li>Continue hitting <code>e</code> to call it several times. Hit any other key to get out of the macro repetition.</li>
 +
</ol>
 +
 
 +
== Naming and saving macros ==
 +
 
 +
You can:
 +
* give a name to the most recently defined macro (<code>C-x C-k n</code>)
 +
* bind it to a key sequence (<code>C-x C-k b</code>)
 +
* insert it in the current buffer as lisp code (<code>M-x insert-kbd-macro</code>).
 +
 
 +
{{Manual|emacs|Save-Keyboard-Macro|Save Keyboard Macro}}
 +
 
 +
 
 +
To bind a keyboard macro to a key use <code>C-x C-k b</code>.  To avoid problems caused by overriding existing bindings, the key sequences <code>C-x C-k 0</code> through <code>C-x C-k 9</code> and <code>C-x C-k A</code> through <code>C-x C-k Z</code> are reserved for your own keyboard macro bindings.  You can, however, bind a keyboard macro to whatever you like.
 +
 
 +
==Variables==
 +
 
 +
Variables can be stored in lisp or in [[registers]].  Here's an example using lisp:
 +
 
 +
<pre>
 +
[M-: (setq x 1)]
 +
<F3>
 +
Line number [C-u M-: x]
 +
[M-: (setq x (+ x 1))]
 +
<F4>
 +
</pre>
 +
 
 +
Now execute the macro four times with the command <code>C-x e e e e</code> and you get:
 +
 
 +
line number 1<br />
 +
line number 2<br />
 +
line number 3<br />
 +
line number 4
 +
 
 +
 
 +
= See also =
 +
 
 +
* [https://github.com/Silex/elmacro elmacro], to show keyboard macros as emacs-lisp
 +
* [https://github.com/abo-abo/centimacro centimacro] to (temporarily) bind any number of macros to any global shortcuts.
 +
* You can use keyboard macros à la vim in [[evil]].
 +
 
 +
 
 +
[[Category:Intermediate]]
 +
[[Category:Editing]]

Revision as of 09:23, 2 October 2014

Basic Keyboard Macro (`(info "(emacs) Basic Keyboard Macro")')

Keyboard macros can be used to automate or repeat tedious editing tasks in Emacs.


Basic Use

[F3], or [C-x (]
Start defining a macro.
[F4], or [C-x )]
Stop defining a macro.
[F4], or [C-x e]
Execute a macro
[C-u 37 C-x e] or [C-u 37 F4]
Execute a macro multiple times, using prefix argument
[C-u 0 C-x e]
Execute a macro until the end of the buffer

Example usage

Consider the standard *scratch* buffer: 

;; This buffer is for notes you don't want to save, and for Lisp evaluation.
;; If you want to create a file, visit that file with C-x C-f,
;; then enter the text in that file's own buffer.

Suppose you want to remove the first occurrence of the letter "a" on every row in that piece of text. You could write a regular expression to do the job, but let's assume you want to use a keyboard macro this time.

  1. Make sure point is at the start of the buffer.
  2. Hit C-x ( to start recording your macro. Note: If you hit C-g or if an error occurs, your keyboard macro recording will stop.
  3. Hit C-s followed by a to find the first "a". Now, point is right after the first "a" in the text.
  4. Hit backspace to delete that "a".

The first occurrence of "a" of the first line has been deleted. Let's move point to the beginning of the next line and then stop recording.

  1. Hit C-e C-f to move point to the beginning of the next line.
  2. Hit C-x ) to finish the recording of our macro.

The macro you have just recorded performs the operation of removing the first occurrence of "a" it can find and then moving point to the next line.

  1. Hit C-x e once to call that macro.
  2. Continue hitting e to call it several times. Hit any other key to get out of the macro repetition.

Naming and saving macros

You can:

  • give a name to the most recently defined macro (C-x C-k n)
  • bind it to a key sequence (C-x C-k b)
  • insert it in the current buffer as lisp code (M-x insert-kbd-macro).

Save Keyboard Macro (`(info "(emacs) Save Keyboard Macro")')


To bind a keyboard macro to a key use C-x C-k b. To avoid problems caused by overriding existing bindings, the key sequences C-x C-k 0 through C-x C-k 9 and C-x C-k A through C-x C-k Z are reserved for your own keyboard macro bindings. You can, however, bind a keyboard macro to whatever you like.

Variables

Variables can be stored in lisp or in registers. Here's an example using lisp: 

[M-: (setq x 1)]
<F3>
Line number [C-u M-: x]
[M-: (setq x (+ x 1))]
<F4>

Now execute the macro four times with the command C-x e e e e and you get:

line number 1
line number 2
line number 3
line number 4


See also

  • elmacro, to show keyboard macros as emacs-lisp
  • centimacro to (temporarily) bind any number of macros to any global shortcuts.
  • You can use keyboard macros à la vim in evil.
Retrieved from "https://wikemacs.org/index.php?title=Keyboard_macros&oldid=46815"