Difference between revisions of "Keyboard macros"

From WikEmacs
Jump to navigation Jump to search
(Cheap NBA Jerseys)
m (Protected "Keyboard macros" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite)))
 
(566 intermediate revisions by more than 100 users not shown)
Line 1: Line 1:
roblem is most normally associated with sport bikes for the reason that they usually have aaUnless you have got the disposable cash flow to buy a brand new vehicle every time you receive fed up with your old a single, you are likely the kind of man or woman who desires to acquire the absolute most from your motor vehicle.This post will supply some ideas for solving this actual challenge several sportbike and <b></b> sport touring riders working experience though riding even quick distances.You are lost 鈥?you might be a guy, so you will not inquire for instructions 鈥?but that isn't going to change the truth that you might be nevertheless lost.You lost your map, your persistence, and your thoughts a few miles back.You need the most beneficial motorbike GPS worldwide positioning system you cannThis short article offers you some standard strategies to consider so far as all group rides.Getting owned a lot of motorcycles prior to now forty-seven years, I believe I have expert the majority of the extremes and circumstances 1 can meet with ordinary driving.While in the early sixties, I started riding the minor Japanese two-wheeled chainsaws.I stated in one more report of mine that motorcycles are sometimes viewed as grown up toys.This statement might not be agreed on by all people but to the most component it's true.Motorcycles never deliver the protection of the car or truck, the passenger allowance or luggage space of a biggerrIf you're someone that is considering finding into the planet of motorbike riding then you definitely have possibly asked your self this question.This is certainly an report that talks about operating tire pressures that happen to be diverse from what the tire producer suggests.I've played all around with distinctive tire pressures on my sportbikes.Riding on off road motorcycle in footwear, jeans, plus a tee shirt may perhaps appear typical for some.But most of us who've ridden prior to are aware that devoid of the correct mx apparel and protective gear you happen to be asking for injuries.The proper helmet, boots, goggles, pants, jersey,and gloves is justtIf your critically contemplating purchasing a scooter as being a low-cost dependable implies of transport, then a 50cc scooters sale might be interesting for you.I've been r
+
{{Manual|emacs|Basic-Keyboard-Macro|Basic Keyboard Macro}}
 +
 
 +
'''Keyboard macros''' can be used to automate or repeat tedious editing tasks in Emacs.
 +
 
 +
 
 +
==Basic Use==
 +
 
 +
; {{Keys|F3}}, or {{Keys|C-x (}}
 +
: Start defining a macro.
 +
; {{Keys|F4}}, or {{Keys|C-x )}}
 +
: Stop defining a macro.
 +
; {{Keys|F4}}, or {{Keys|C-x e}}
 +
: Execute a macro
 +
; {{Keys|C-u 37 C-x e}} or {{Keys|C-u 37 F4}}
 +
: Execute a macro multiple times, using [[prefix argument]]
 +
; {{Keys|C-u 0 C-x e}}
 +
: Execute a macro until the end of the buffer
 +
 
 +
==Example usage==
 +
 
 +
Consider the standard <code>*scratch*</code> buffer:
 +
 
 +
<pre>
 +
;; This buffer is for notes you don't want to save, and for Lisp evaluation.
 +
;; If you want to create a file, visit that file with C-x C-f,
 +
;; then enter the text in that file's own buffer.
 +
</pre>
 +
 
 +
Suppose you want to remove the first occurrence of the letter "a" on every row in that piece of text. You could write a [[regular expression]] to do the job, but let's assume you want to use a keyboard macro this time.
 +
 
 +
# Make sure [[point]] is at the start of the buffer.
 +
# Hit <code>C-x (</code> to start recording your macro. '''Note:''' If you hit <code>C-g</code> or if an error occurs, your keyboard macro recording will stop.
 +
# Hit <code>C-s</code> followed by <code>a</code> to find the first "a". Now, point is right after the first "a" in the text.
 +
# Hit backspace to delete that "a".
 +
 
 +
The first occurrence of "a" of the first line has been deleted. Let's move point to the beginning of the next line and then stop recording.
 +
 
 +
<ol start="5">
 +
<li>Hit <code>C-e C-f</code> to move point to the beginning of the next line.</li>
 +
<li>Hit <code>C-x )</code> to finish the recording of our macro.</li>
 +
</ol>
 +
 
 +
The macro you have just recorded performs the operation of removing the first occurrence of "a" it can find and then moving point to the next line.
 +
 
 +
<ol start="7">
 +
<li>Hit <code>C-x e</code> once to call that macro.</li>
 +
<li>Continue hitting <code>e</code> to call it several times. Hit any other key to get out of the macro repetition.</li>
 +
</ol>
 +
 
 +
== Naming and saving macros ==
 +
 
 +
You can:
 +
* give a name to the most recently defined macro (<code>C-x C-k n</code>)
 +
* bind it to a key sequence (<code>C-x C-k b</code>)
 +
* insert it in the current buffer as lisp code (<code>M-x insert-kbd-macro</code>).
 +
 
 +
{{Manual|emacs|Save-Keyboard-Macro|Save Keyboard Macro}}
 +
 
 +
 
 +
To bind a keyboard macro to a key use <code>C-x C-k b</code>.  To avoid problems caused by overriding existing bindings, the key sequences <code>C-x C-k 0</code> through <code>C-x C-k 9</code> and <code>C-x C-k A</code> through <code>C-x C-k Z</code> are reserved for your own keyboard macro bindings. You can, however, bind a keyboard macro to whatever you like.
 +
 
 +
==Variables==
 +
 
 +
Variables can be stored in lisp or in [[registers]]. Here's an example using lisp:
 +
 
 +
<pre>
 +
[M-: (setq x 1)]
 +
<F3>
 +
Line number [C-u M-: x]
 +
[M-: (setq x (+ x 1))]
 +
<F4>
 +
</pre>
 +
 
 +
Now execute the macro four times with the command <code>C-x e e e e</code> and you get:
 +
 
 +
line number 1<br />
 +
line number 2<br />
 +
line number 3<br />
 +
line number 4
 +
 
 +
 
 +
= See also =
 +
 
 +
* [https://github.com/Silex/elmacro elmacro], to show keyboard macros as emacs-lisp
 +
* [https://github.com/abo-abo/centimacro centimacro] to (temporarily) bind any number of macros to any global shortcuts.
 +
* You can use keyboard macros à la vim in [[evil]].
 +
 
 +
 
 +
[[Category:Intermediate]]
 +
[[Category:Editing]]

Latest revision as of 15:27, 4 July 2016

Basic Keyboard Macro (`(info "(emacs) Basic Keyboard Macro")')

Keyboard macros can be used to automate or repeat tedious editing tasks in Emacs.


Basic Use

[F3], or [C-x (]
Start defining a macro.
[F4], or [C-x )]
Stop defining a macro.
[F4], or [C-x e]
Execute a macro
[C-u 37 C-x e] or [C-u 37 F4]
Execute a macro multiple times, using prefix argument
[C-u 0 C-x e]
Execute a macro until the end of the buffer

Example usage

Consider the standard *scratch* buffer:

;; This buffer is for notes you don't want to save, and for Lisp evaluation.
;; If you want to create a file, visit that file with C-x C-f,
;; then enter the text in that file's own buffer.

Suppose you want to remove the first occurrence of the letter "a" on every row in that piece of text. You could write a regular expression to do the job, but let's assume you want to use a keyboard macro this time.

  1. Make sure point is at the start of the buffer.
  2. Hit C-x ( to start recording your macro. Note: If you hit C-g or if an error occurs, your keyboard macro recording will stop.
  3. Hit C-s followed by a to find the first "a". Now, point is right after the first "a" in the text.
  4. Hit backspace to delete that "a".

The first occurrence of "a" of the first line has been deleted. Let's move point to the beginning of the next line and then stop recording.

  1. Hit C-e C-f to move point to the beginning of the next line.
  2. Hit C-x ) to finish the recording of our macro.

The macro you have just recorded performs the operation of removing the first occurrence of "a" it can find and then moving point to the next line.

  1. Hit C-x e once to call that macro.
  2. Continue hitting e to call it several times. Hit any other key to get out of the macro repetition.

Naming and saving macros

You can:

  • give a name to the most recently defined macro (C-x C-k n)
  • bind it to a key sequence (C-x C-k b)
  • insert it in the current buffer as lisp code (M-x insert-kbd-macro).

Save Keyboard Macro (`(info "(emacs) Save Keyboard Macro")')


To bind a keyboard macro to a key use C-x C-k b. To avoid problems caused by overriding existing bindings, the key sequences C-x C-k 0 through C-x C-k 9 and C-x C-k A through C-x C-k Z are reserved for your own keyboard macro bindings. You can, however, bind a keyboard macro to whatever you like.

Variables

Variables can be stored in lisp or in registers. Here's an example using lisp:

[M-: (setq x 1)]
<F3>
Line number [C-u M-: x]
[M-: (setq x (+ x 1))]
<F4>

Now execute the macro four times with the command C-x e e e e and you get:

line number 1
line number 2
line number 3
line number 4


See also

  • elmacro, to show keyboard macros as emacs-lisp
  • centimacro to (temporarily) bind any number of macros to any global shortcuts.
  • You can use keyboard macros à la vim in evil.