Difference between revisions of "Keyboard macros"

From WikEmacs
Jump to navigation Jump to search
(fake oakleys olaje)
m (Protected "Keyboard macros" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite)))
 
(75 intermediate revisions by 29 users not shown)
Line 1: Line 1:
+
{{Manual|emacs|Basic-Keyboard-Macro|Basic Keyboard Macro}}
One of the most common differences between knock off Oakleys and the real ones is the latter's capability to filter out UV rays. This is one element, which the knock off Oakleys across the board lack. So do not be surprised if the storekeeper admits to the same. But there are many ways to spot a replica if you are out to buy one. One of the simplest ways for spotting is when they tell you that it comes dirt-cheap. Secondly try if it is the Internet that you are trying to buy the sunglasses, chances are that you would end up with a pair of replica Oakley sunglasses. In exchange, the company, sprawled across 600,000 square feet of prime real estate Orange County, California, offers its employees perks like mountain bike trails, an advanced on site gymnasium, athlete signings, bon fires, a BMX pump track, and more. With a wealth of devotion to usability and appearance behind them, you can wear a pair of Oakley sunglasses with a sense of security, comfort and pride. These were some of the tips, which should help you to distinguish between genuine Oakley sunglasses and replicas. But still there are some replica Oakley sunglasses, which almost match up to the original in matters of refinement. All the replicas really lack is the brand endorsement. So unless you are very sure that you want to buy the genuine Oakleys themselves, the replica Oakley sunglasses often serve as an economical and therefore, a popular choice.  Oakley sunglasses are somewhat of a cult brand in the sporting world, some optical specialists will be able to offer a variety of products including, sunglasses, goggles and watches, suitable for customers to use on a summer holiday or even an adrenaline-packed skiing trip. While the X Metal standard frames offer a great looking pair of shades, it is also possible to customize the Oakley sunglasses with the plasma frame. For even more customization, consider Oakley Juliet replacement lenses in the color of your choice. There are twelve different colors from which to choose, and one is certain to fit your needs. Polarizing the lenses gives the optics even more special effects. Oakley Gascan sunglasses are in my opinion, the best looking and highest quality sunglasses manufactured by Oakley. One really amazing feature of the Gascans is their high quality lenses. The lenses block 100% of all UV rays. This means that you don't have to worry about damaging your eyes when you're outside. The lenses also meet the stringent ANSI Z87.1 standard which means the lenses are highly impact resistant.
+
 
 +
'''Keyboard macros''' can be used to automate or repeat tedious editing tasks in Emacs.
 +
 
 +
 
 +
==Basic Use==
 +
 
 +
; {{Keys|F3}}, or {{Keys|C-x (}}
 +
: Start defining a macro.
 +
; {{Keys|F4}}, or {{Keys|C-x )}}
 +
: Stop defining a macro.
 +
; {{Keys|F4}}, or {{Keys|C-x e}}
 +
: Execute a macro
 +
; {{Keys|C-u 37 C-x e}} or {{Keys|C-u 37 F4}}
 +
: Execute a macro multiple times, using [[prefix argument]]
 +
; {{Keys|C-u 0 C-x e}}
 +
: Execute a macro until the end of the buffer
 +
 
 +
==Example usage==
 +
 
 +
Consider the standard <code>*scratch*</code> buffer:
 +
 
 +
<pre>
 +
;; This buffer is for notes you don't want to save, and for Lisp evaluation.
 +
;; If you want to create a file, visit that file with C-x C-f,
 +
;; then enter the text in that file's own buffer.
 +
</pre>
 +
 
 +
Suppose you want to remove the first occurrence of the letter "a" on every row in that piece of text. You could write a [[regular expression]] to do the job, but let's assume you want to use a keyboard macro this time.
 +
 
 +
# Make sure [[point]] is at the start of the buffer.
 +
# Hit <code>C-x (</code> to start recording your macro. '''Note:''' If you hit <code>C-g</code> or if an error occurs, your keyboard macro recording will stop.
 +
# Hit <code>C-s</code> followed by <code>a</code> to find the first "a". Now, point is right after the first "a" in the text.
 +
# Hit backspace to delete that "a".
 +
 
 +
The first occurrence of "a" of the first line has been deleted. Let's move point to the beginning of the next line and then stop recording.
 +
 
 +
<ol start="5">
 +
<li>Hit <code>C-e C-f</code> to move point to the beginning of the next line.</li>
 +
<li>Hit <code>C-x )</code> to finish the recording of our macro.</li>
 +
</ol>
 +
 
 +
The macro you have just recorded performs the operation of removing the first occurrence of "a" it can find and then moving point to the next line.
 +
 
 +
<ol start="7">
 +
<li>Hit <code>C-x e</code> once to call that macro.</li>
 +
<li>Continue hitting <code>e</code> to call it several times. Hit any other key to get out of the macro repetition.</li>
 +
</ol>
 +
 
 +
== Naming and saving macros ==
 +
 
 +
You can:
 +
* give a name to the most recently defined macro (<code>C-x C-k n</code>)
 +
* bind it to a key sequence (<code>C-x C-k b</code>)
 +
* insert it in the current buffer as lisp code (<code>M-x insert-kbd-macro</code>).
 +
 
 +
{{Manual|emacs|Save-Keyboard-Macro|Save Keyboard Macro}}
 +
 
 +
 
 +
To bind a keyboard macro to a key use <code>C-x C-k b</code>. To avoid problems caused by overriding existing bindings, the key sequences <code>C-x C-k 0</code> through <code>C-x C-k 9</code> and <code>C-x C-k A</code> through <code>C-x C-k Z</code> are reserved for your own keyboard macro bindings. You can, however, bind a keyboard macro to whatever you like.
 +
 
 +
==Variables==
 +
 
 +
Variables can be stored in lisp or in [[registers]]. Here's an example using lisp:
 +
 
 +
<pre>
 +
[M-: (setq x 1)]
 +
<F3>
 +
Line number [C-u M-: x]
 +
[M-: (setq x (+ x 1))]
 +
<F4>
 +
</pre>
 +
 
 +
Now execute the macro four times with the command <code>C-x e e e e</code> and you get:
 +
 
 +
line number 1<br />
 +
line number 2<br />
 +
line number 3<br />
 +
line number 4
 +
 
 +
 
 +
= See also =
 +
 
 +
* [https://github.com/Silex/elmacro elmacro], to show keyboard macros as emacs-lisp
 +
* [https://github.com/abo-abo/centimacro centimacro] to (temporarily) bind any number of macros to any global shortcuts.
 +
* You can use keyboard macros à la vim in [[evil]].
 +
 
 +
 
 +
[[Category:Intermediate]]
 +
[[Category:Editing]]

Latest revision as of 15:27, 4 July 2016

Basic Keyboard Macro (`(info "(emacs) Basic Keyboard Macro")')

Keyboard macros can be used to automate or repeat tedious editing tasks in Emacs.


Basic Use

[F3], or [C-x (]
Start defining a macro.
[F4], or [C-x )]
Stop defining a macro.
[F4], or [C-x e]
Execute a macro
[C-u 37 C-x e] or [C-u 37 F4]
Execute a macro multiple times, using prefix argument
[C-u 0 C-x e]
Execute a macro until the end of the buffer

Example usage

Consider the standard *scratch* buffer:

;; This buffer is for notes you don't want to save, and for Lisp evaluation.
;; If you want to create a file, visit that file with C-x C-f,
;; then enter the text in that file's own buffer.

Suppose you want to remove the first occurrence of the letter "a" on every row in that piece of text. You could write a regular expression to do the job, but let's assume you want to use a keyboard macro this time.

  1. Make sure point is at the start of the buffer.
  2. Hit C-x ( to start recording your macro. Note: If you hit C-g or if an error occurs, your keyboard macro recording will stop.
  3. Hit C-s followed by a to find the first "a". Now, point is right after the first "a" in the text.
  4. Hit backspace to delete that "a".

The first occurrence of "a" of the first line has been deleted. Let's move point to the beginning of the next line and then stop recording.

  1. Hit C-e C-f to move point to the beginning of the next line.
  2. Hit C-x ) to finish the recording of our macro.

The macro you have just recorded performs the operation of removing the first occurrence of "a" it can find and then moving point to the next line.

  1. Hit C-x e once to call that macro.
  2. Continue hitting e to call it several times. Hit any other key to get out of the macro repetition.

Naming and saving macros

You can:

  • give a name to the most recently defined macro (C-x C-k n)
  • bind it to a key sequence (C-x C-k b)
  • insert it in the current buffer as lisp code (M-x insert-kbd-macro).

Save Keyboard Macro (`(info "(emacs) Save Keyboard Macro")')


To bind a keyboard macro to a key use C-x C-k b. To avoid problems caused by overriding existing bindings, the key sequences C-x C-k 0 through C-x C-k 9 and C-x C-k A through C-x C-k Z are reserved for your own keyboard macro bindings. You can, however, bind a keyboard macro to whatever you like.

Variables

Variables can be stored in lisp or in registers. Here's an example using lisp:

[M-: (setq x 1)]
<F3>
Line number [C-u M-: x]
[M-: (setq x (+ x 1))]
<F4>

Now execute the macro four times with the command C-x e e e e and you get:

line number 1
line number 2
line number 3
line number 4


See also

  • elmacro, to show keyboard macros as emacs-lisp
  • centimacro to (temporarily) bind any number of macros to any global shortcuts.
  • You can use keyboard macros à la vim in evil.