Evil

From WikEmacs
Revision as of 12:49, 5 February 2016 by Elvince (talk | contribs) (→‎Usage)
Jump to navigation Jump to search

Evil is an extensible vi layer for Emacs. It provides Vim features like Visual selection and text objects, and is the successor to the now defunct vimpulse and vim-mode.

Installation

Evil can be downloaded and installed using el-get with: M-x el-get-install RET evil RET, or using Melpa with M-x package-install RET evil RET.


Manual install

Alternatively, Evil lives in a Mercurial repository. To download Evil, do:

hg clone https://bitbucket.org/lyro/evil

If you don't have Mercurial, you can download Evil here: https://bitbucket.org/lyro/evil/get/default.zip

If you installed it manually, move Evil to ~/.emacs.d/evil (or somewhere else in your load-path). In any case, add the following lines to ~/.emacs:

(add-to-list 'load-path "~/.emacs.d/evil") ;;no need with 24
(require 'evil)
(evil-mode 1)


Evil requires UndoTree in the load-path for linear undo and undo branches. Otherwise, Evil uses regular Emacs undo.

Documentation

A brief PDF manual is available in the /doc subdirectory.

Usage

For those not familiar with vim, here's a quick summary of useful commands.


Tip:: to see a full list of commands available in the current mode, install help-fns+ with ELPA, require it (see its doc). Now you can type C-h M-k.


To enter insert state: try out i a o and the upper-case ones;

To delete chars, words and lines use x, the usual d followed by a word or a movement ($ is end of line, ^ the beginning), dd and D, or replace an object with c ; Want to delete a whole line and enter insert mode ? `S` or `cc`.

Copy and paste: y Y p P ;

To navigate around the buffer, in normal mode, use e E w W b B t T f F ( ) { } and j k h l - + <RET> <backspace> <space>; Go to beginning and end of buffer with gg and G;

Cycle between cursor position: double backquotes, C-i and C-o;

To navigate around the screen, use H L M to go to the Highest/Lowest/Middle line of the screen;

Search forward and backward with / and ?, use n and N to go to the next and previous occurence;

Go to the next or previous occurence of token under point with * or # ;

Select a region with v or V, use vi and ", ( or [ to select what's inside them and re-select the last region selected with gv. Again with text objects, type ci( when you are inside brackets to replace all that is inside them.

Go to the definition of the symbol under point with gd ;

Indent the line or region with < and > ;


Operate on text objects: `diw` will delete a word, replace the `w` with a `p` to act on the paragraph;


Some more:

Join lines with J

Set a mark with m<char>, go to a mark with backquote + <char>

Code folding with za (toggle), zc (close), zm and zr (close and open all)

Move the current line at the center, bottom and top of screen: zz, zb and zt (C-l with emacs)

Configuration

One thing I would recommend to any ex vimmer is to make escape to quit actually pretty much anything (like pending prompts in the minibuffer):

   ;;; esc quits
   (define-key evil-normal-state-map [escape] 'keyboard-quit)
   (define-key evil-visual-state-map [escape] 'keyboard-quit)
   (define-key minibuffer-local-map [escape] 'minibuffer-keyboard-quit)
   (define-key minibuffer-local-ns-map [escape] 'minibuffer-keyboard-quit)
   (define-key minibuffer-local-completion-map [escape] 'minibuffer-keyboard-quit)
   (define-key minibuffer-local-must-match-map [escape] 'minibuffer-keyboard-quit)
   (define-key minibuffer-local-isearch-map [escape] 'minibuffer-keyboard-quit)

The following makes you lose vim commands, but gives you back basic emacs commands, like C-y to paste in insert mode or C-r to search backward:

   (define-key evil-normal-state-map "\C-y" 'yank)
   (define-key evil-insert-state-map "\C-y" 'yank)
   (define-key evil-visual-state-map "\C-y" 'yank)
   (define-key evil-insert-state-map "\C-e" 'end-of-line)
   (define-key evil-normal-state-map "\C-w" 'evil-delete)
   (define-key evil-insert-state-map "\C-w" 'evil-delete)
   (define-key evil-insert-state-map "\C-r" 'search-backward)
   (define-key evil-visual-state-map "\C-w" 'evil-delete)

Use fine grain undo

In insert mode, Evil uses linear undo. If you want fine grain undo:

   (setq evil-want-fine-undo t)

but remember, we shouldn't stay long in insert mode.

Use keychords to go back to normal mode

If you'd like to type jj or jk in insert mode to go back to normal mode, you may use key-chord:

   (key-chord-define evil-insert-state-map "jj" 'evil-normal-state)

Or you can use evil-escape, which is installed by default in spacemacs:

   (setq-default evil-escape-key-sequence "jj")

Load config only when we call evil-mode

I still load evil with M-x, I didn't set (evil-mode 1), so in order to tweak keybindings I had to enclose them in a hook, so that my config is called when evil is called and not at startup:

   (add-hook 'evil-after-load-hook
         (lambda ()
         ;; config
    ))

Hooks

There are some hooks that allow to do things when we enter or exit a mode (see the pdf manual).

For example, to save the buffer when we exit the insert mode:

   (defun my-save-if-bufferfilename ()
     (if (buffer-file-name)
         (progn
           (save-buffer)
           )
       (message "no file is associated to this buffer: do nothing")
       )
   )
   (add-hook 'evil-insert-state-exit-hook 'my-save-if-bufferfilename)

Enter an emacs mode in a given state

There are some situations where you don't want to be in normal mode by default. For example, it's more useful to be in insert mode when we enter a magit commit buffer, or maybe you prefer to be in emacs mode in a dired buffer.

For that purpose, evil provides the evil-set-initial-state command (see part 2.2 of the pdf documentation) that we can use like that:

(evil-set-initial-state 'git-commit-mode 'insert) ;; enter insert mode to edit a commit message

Here is a handy loop to define more at once:

    (loop for (mode . state) in '((inferior-emacs-lisp-mode . emacs)
                              (nrepl-mode . insert)
                              (pylookup-mode . emacs)
                              (comint-mode . normal)
                              (shell-mode . insert)
                              (git-commit-mode . insert)
                              (git-rebase-mode . emacs)
                              (term-mode . emacs)
                              (help-mode . emacs)
                              (helm-grep-mode . emacs)
                              (grep-mode . emacs)
                              (bc-menu-mode . emacs)
                              (magit-branch-manager-mode . emacs)
                              (rdictcc-buffer-mode . emacs)
                              (dired-mode . emacs)
                              (wdired-mode . normal))
      do (evil-set-initial-state mode state))

See also

Articles

Plug-ins

  • ace-jump: Port of Vim's Easy-motion: jump to any character in the buffer with 3 keystrokes.
  • evil-org-mode: Supplemental evil-mode key-bindings to Emacs org-mode.
  • evil-tabs: for when you type :tabnew and nothing happens.

search for all plugins in the melpa page.

Bug tracker

The bugtrucker can be found on Bitbucket.